Secure Element (default)

Microchip ATECC608

Board Power Supply (USB/VIN)

5V

Supported Battery

Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)

Circuit Operating Voltage

3.3V

Current Consumption

2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)

Timers

22x timers and watchdogs

UART

4x ports (2 with flow control)

Ethernet PHY

10 / 100 Mbps (through expansion port only)

SD Card

Interface for SD Card connector (through expansion port only)

Operational Temperature

-40 °C to +85 °C

MKR Headers

Use any of the existing industrial MKR shields on it

High-density Connectors

Two 80 pin connectors will expose all of the board's peripherals to other devices

Camera Interface

8-bit, up to 80 MHz

ADC

3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)

DAC

2× 12-bit DAC (1 MHz) available, only one is accessible by the user through the external A6 pin

USB-C

Host / Device, High / Full Speed, Power delivery